Degrees |
- Ph.D. Polymer Engineering 2004,
AmirKabir University of Technology(Tehran Polytechnic), Tehran, Iran. - M.Sc. Polymer Engineering
1998, AmirKabir University of
Technology(Tehran Polytechnic), Tehran, Iran. - B.Sc. Polymer Engineering
1996, |
Research Interests |
The Main Interests : -
Polymer Processing -
Rheology and Morphology of Polymeric Multi Component
systems -
Polymeric Nanocomposites -
Polymer Modification -
Polymer recycling -
Heat Transfer |
CURRENT RESEARCH |
-
Rheology and Morphology of
multiphase Polymeric Syestems. -
Reactive Modification of Polymers and Polymer Blends. -
Polyolefine Foam Processing. -
Polymeric Nanocomposites. -
Polymer Recycling |
PUBLICATIONS |
|
JOURNAL
PAPERS |
1. M.K. RazaviAghjeh, H.
Nazockdast and H. Assempour
“Determination of the Residence Time Distribution in Twin Screw
Extruders via Free Radical Modification of PE” International Polymer
Processing , Vol.19 (4) 2004. 2. M.K. RazaviAghjeh, H.
Nazockdast and H. Assempour
“Parameters Affecting the Free Radical Melt Grafting of Maleic
Anhydride onto Linear Low Density Polyethylene in an Internal Mixer” Journal of Applied Polymer Science 19(1) (2006). 3. M.Faker; M.K. Razavi Aghjeh, M.
Ghaffari, S. A. Seyyedi. "Rheology, Morphology and Mechanical Properties
of Polyethylene/Ethylene Vinyl Acetate Copolymer (PE/EVA) Blends" European Polymer Journal, 44, 2008. 4. S. Ebrahimi, J.S. Moghaddas, M.K. Razavi
Aghjeh. "Study on thermal cracking behavior of petroleum
residue". Fuel, 87, 2008. 5. M. Tahmasebpour, A.A. Babaluo, M.K.
Razavi Aghjeh. "Synthesis of zirconia
nanopowders from various zirconium salts via polyacrylamide gel method".
Journal of the European Ceramic Society, 28, 2008. 6. M. K. Razavi Aghjeh,
M. Khodabandelou, M. Khezrefaridi. “Rheology and Morphology of High Impact
Polystyrene/ Polyethylene Blends and the Effect of Compatibilization on Their
Properties. Journal of Applied Polymer Science, Vol. 114, 2235–2245 (2009) 7- R. Rezanavaz, M.K.Razavi Aghjeh, A.A. Babaluo.
"Rheology, Morphology and Thermal Behavior of HDPE/Clay
Nanocomposites". Polymer Composites (2009). 8- M. Khodabandelou, M.K.
Razavi Aghjeh, M. Rezaei “Fracture
behavior and environmental stress cracking resistance (ESCR) of HIPS/PE
blends and the effect of compatibilization on their properties”. Engineering
Fracture Mechanics 76 (2009) 2856–2867 9- E. Esmaeilnezhad, M. Rezaei, M. K. Razavi The Effect
of Alternative Blowing Agents on Microstructure and Mechanical
Characteristics of Rigid Polyurethane Foam Iranian Polymer Journal 10- M. Peyravi, M.
Akhfash Ardestani, A. A. Babaluo, M. K. Razavi Aghjeh, S. R.
Pishghadam, E. Jannatdoust Synthesis and characterization of
nanostructured-segmented block copolyetheramide based on nylon6 and
polyethylene oxide Chinese Journal of Polymer Science, Accepted (2010). 12- A. Shenavar F.Abbasi, A.
Zamani and M.K.Razavi Aghjeh. "Flow and Mechanical Properties of Carbon Black Filled
Acrylonitrile-Butadiene-Styrene (ABS)". Journal
of thermoplastic composite material, Vol.
22—November 2009 753 |
CONFERENCE
PAPERS |
1. M.K.RazaviAghjeh, H. Nazockdast and H. Assempour; “Functionalization
of PE with MA in an internal Mixer” ISPST
2003 Tehran, Iran. 2. M.K. RazaviAghjeh, H.
Nazockdast and H. Assempour; “Study on
Parameters Affecting the Functionalization of PE Using the MA in an Internal Mixer” Polymer Processing
Society (19th conference), 2003, Athene, Greece. 3. M.K. RazaviAghjeh, H. Nazockdast and H. Assempour; ‘Experimental
Determination of the Residence Time Distribution in Twin Screw Extruders”
Polymer Processing Society (20th conference), 2004, Akron, Ohaio,
USA. 4. M.K. RazaviAghjeh, H. Nazockdast and H. Assempour; “Study on
Parameters Affecting the Melt Grafting of MA on to Linear Low Density
Polyethylene in Twin Screw Extruder”
Polymer Processing Society (20th conference), 2004, Akron, Ohaio,
USA. 5. M.K. RazaviAghjeh, H. Nazockdast and H. Assempour; “Rheological
Behavior of MA modified Polyethylene” 14th
Coference of Rheology, 2004, Seoul, Korea. 6. M.K. RazaviAghjeh, H. Nazockdast and H. Assempour; “Effect of Feeding
Order on MA functionalization of PE” IUPAC 2004, Paris France. 7.
M.K. RazaviAghjeh, and H. Nazockdast; “Evolution of Peroxide Modification of
PE; Structural Changes and Rheological Study” Polymer Processing Society, (21th
conference), 2005, Lipzic Germany. 8.
M. Khezr faridi and M.K.Razavi
Aghjeh "Rheology, Morphology and
Mechanical Properties of HIPS/PE Blends and the Effect of Compatiblization on
their Properties". Polymer
Processing Society (PPS), Perotaria, South Africa, 2006. 9.
N.Faragi, M.K.Razavi Aghjeh and
M.Salehi
"Flow Modeling in Spiral Mandrel Dies; the Effect of Groove's Geometry
on Flow Distribution and Pressure Drop". Polymer Processing Society (PPS), Perotaria,
South Africa, 2006. 10. M. Faker, M.K.Razavi Aghjeh
and M. Gaffari "Effect of the High-Energy Electron Beam Irradiation on
the Morphology and Mechanical Properties of PE/EVA Blends". 7th
International Symposium on Ionizing Radiation and Polymers (IRAP 2006),
Antalya Turkey, 2006. 11. M. Faker, M.K.Razavi Aghjeh
and M. Gaffari " Rheology , morphology and mechanical properties of
polyethylene/ethylene vinyl acetate copolymer (PE/EVA) blends)". Macro 2006, Punie, India 12. Kh. Shahbazi, M.K.Razavi
Aghjeh, A. Abbasi and M.Tavakol. "Reactive Compatibilization of
Polyethylene/Polystyrene (PE/PS) Blends viaFriedel-Crafts Alkylation;
Rheology and Morphology". Macro 2006, Punie, India. 1. R. Rezanavaz, M.K. Razavi
Aghjeh, A.A. Babalou and H. Farahzadi. "Parameters Affecting the
Morphology, Rheology and Mechanical Properties of HDPE/Clay Nanocomposites". Intenational Polymer
Processing, Conference (24th
conference), Salerno,Italy, 2008 2. M. Khodabandelou and M.K.
Razavi Aghjeh. "Relationship between the Morphology and Mechanical
Properties of Compatibilized and Un-compatibilized HIPS/PE Blends". Intenational Polymer
Processing, Conference (24th
conference), Salerno,Italy, 2008 3. M.Faker, M.K.Razavi Aghjeh
and M. Gaffari. “ Rheology , morphology and mechanical properties of
polyethylene/ethylene vinyl acetate copolymer blends and effect of electron
beem radiation on their properties Intenational Polymer Processing,
Conference (23th conference) Shanghai, China,
2007 |
Courses
Taught |
- Advanced Polymer Processing (M.S.) - Advanced Polymerization Reaction Engineering (M.S.) - Advanced Chemical Reaction Engineering (M.S.) -Polymer Synthesis (M.S.) - Polymer Characterization (M.S.) - Heat Transfer
(B.S.) - Rheology (B.S.) |