Institute of Polymeric Materials
IPM
IPM
Farhang Abbasi
Professor of  Polymer Engineering
(Director of IPM)

Birth Date: June 23, 1969
Status:
Iranian Citizen
Address:
Polymer Engineering Department
Sahand University of Technology
P.O.Box 51335-1996, Tabriz, IRAN

Tel: 
+98 412 3459090
Fax:
+98 412 3444313
Email:
f.abbasi@sut.ac.ir
Marquee
 
Search in google for:
Home  | SUT  |  Site map |
People
People
Staff
Dr.Abbasi
Dr.Babaluo
Dr.Choupani
Dr.Hosseinpour
Dr.Mahdavian
Dr.Porabbas
Dr.Razavi
Dr.Rezaei
Dr.Salami Hosseini
Dr.Salami Kalajahi
Dr.Talebi
Dr.Yazdani
Eng.Jalili
Eng.Nasiri
Eng.Alizadehaghdam
Student
Current Students
. . . . . BSc
. . . . . MSc
. . . . . PhD
Alumni Students
. . . . . BSc
. . . . . MSc
. . . . . PhD
 CURRICULUM VITAE

Farhang ABBASI, Professor of Polymer Engineering

Head of Institute of Polymeric Materials, Sahand University of Technology,

P. O. Box: 51335-1996, Tabriz, IRAN

E-mail: f.abbasi@sut.ac.ir

 


 

 

 

 

 

 

Farhang Abbasi born 1969, obtained his MSc at the Amirkabir University of Technology, followed by a PhD in polymer engineering at the same university (2002). Subsequently, he joined Sahand University of Technology as an assistant professor in faculty of chemical engineering, then was head of research center for polymeric materials at SUT in 2003. He won the first prize of 9th Razi Medical Sciences Festival (medical instruments, discovery and invention division), IRAN, 2003. He was selected as top researcher of faculty of chemical engineering at SUT in 2003 and 2004. He was also the first winner of PhD Students Selection Award by Iran Polymer Engineering Society, IRAN, 2004. In 2005, he was selected as top researcher of engineering faculties at SUT. In 2008, he was selected as a top research manager of Iranian universities and research institutes. Presently, he is the director of Institute of Polymeric Materials (IPM) and works as a associate professor in Faculty of Polymer Engineering.


 

PERSONAL INFORMATION

Name: Farhang

Family Name: Abbasi

Birth Date: June 23, 1969

Address: Sahand University of Technology

P.O.Box 51335-1996, Tabriz, IRAN

Email: f.abbasi@sut.ac.ir

Languages: Persian and English

 

Degrees

-  Ph. D. Polymer Engineering 2002, Amirkabir University of Technology, Tehran, Iran.

 

-  M. Sc. Polymer Engineering 1995, Amirkabir University of Technology, Tehran, Iran.

 

-  B. Sc. Chemical Engineering 1993, Amirkabir University of Technology, Tehran, Iran.

 

SCHOLARSHIP & AWARDS

1.     Third Winner of 1th National Researcher Selection Award (Ministry of Science, Researches and Technology & Ministry of Transportation), 2000, IRAN.

2.     Fellowship Visiting at University of Innsbruck (Innsbruck, Austria) and Med-El Company, Innsbruck, Austria, 2000.

3.     First Winner of 9th Razi Medical Sciences Festival (medical instruments, discovery and invention division), IRAN, 2003.

4.     Selected Researcher, Department of Chemical Engineering, Sahand University of Technology, IRAN, 2003.

5.     First winner of Ph. D. Students Selection Award by Iran Polymer Engineering Society, IRAN, 2004.

6.     Selected Researcher, Department of Chemical Engineering, Sahand University of Technology, IRAN, 2004.

7.     Selected Researcher, Department of Chemical Engineering, Sahand University of Technology, IRAN, 2005.

8.     Selected Researcher of Engineering Departments, Sahand University of Technology, IRAN, 2005.

9.     Selected Researcher of Engineering Departments, Sahand University of Technology, IRAN, 2006.

10. Selected Research Manager, Ministry of Science, Research and Technology, IRAN, 2009.

 

Research Interests

-       Suspension polymerization

-       Surface and bulk modification of polymers

-       Multicomponent polymeric systems

-       Skin regeneration and skin substitutes

CURRENT RESEARCH PROJECS

 

-         Modeling of particle size and particle size distribution in suspension polymerization of styrene/methyl methacrylate (funded by IRTRF)

-         Preparation of scafolds for skin regeneration (funded by SUT)

FINISHED PROJECTES

-         Surface and Bulk Modification of Polydimethylsiloxane and Their Effects on Adhesion between Modified and Unmodified Layers (2005) (funded by SUT)

-         Studying the ABS production processes and comparing with TPC ABS production processes (2006) (funded by TPC)

-         Study on improvement of performances of inner liner and tire tread compounds filled with hybrid fillers (2007) (funded by IRTIP)

-         Study on the effect of particle size, particle size distribution and rubber content on the physical-mechanical properties of ABS (2007) (funded by NPC-RT)

-         Preparation and charachterization of organic-inorganic hybrids based on Bis-GMA (2007) (funded by IRTIP)

-         Study on the morphology and influence of domain size on the properties of silicone containing hydrophilic IPNs (2007) (funded by SUT)

-         Study on the effect of particle size, particle size distribution and rubber content on the physical-mechanical properties of ABS (2007) (funded by IPRT)

-         Polymer modification by IPNs (2008) (funded by SUT)

-         Lab Scale synthesis of gray EPS (2009) (funded by Tabriz Petrochemical Co.)

-         Separation of H2S and CO2 using the mixed matrix membranes (2010) (funded by Iran National Gas Co.)

-         Know-how codification of synthesis of lost foam copolymer with industrial grade materials for iron casting (funded by MIM and IRTRF)

 

PUBLICATIONS

 

JOURNAL PAPERS

 

1.      F. Abbasi, A. Shojaei and A. A. Katbab, “Thermal interaction between polymer-based composite friction materials and counterfaces”, Journal of Applied Polymer Science 81, 364-369 (2001). 

2.      F. Abbasi, H. Mirzadeh and A. A. Katbab, “Modification of the silicone rubber for biomedical application: a review”, Polymer International 50, 1279-1287 (2001). 

3.      F. Abbasi, H. Mirzadeh and A. A. Katbab, “Sequential interpenetrating polymer networks of poly(2-hydroxyethyl methacrylate) and polydimethylsiloxane”, Journal of Applied Polymer science 85, 1825-1831 (2002). 

4.      F. Abbasi, H. Mirzadeh and A. A. Katbab, “Comparison of viscoelastic properties of polydimethylsiloxane/ poly(2-hydroxyethyl methacrylate) IPN's with their physical blends”, Journal of Applied Polymer Science 86, 3480-3485 (2002).

5.      F. Abbasi, H. Mirzadeh and A. A. Katbab, “Bulk and surface modification of silicone rubber for biomedical applications”, Polymer International 51, 882-888 (2002). 

6.      F. Abbasi and H. Mirzadeh, “Properties of poly(dimethylsiloxane)/hydrogel multicomponent systems”, Journal of Polymer Science Part B: Polymer Physics 41, 2145-2156 (2003). 

7.      H. Mirzadeh and F. Abbasi, “Segmented detachable structure of cochlear-implant electrodes for close-hugging engagement with the modiolus”, Journal of Biomedical Materials Research Part B: Applied Biomaterials 68B, 191-198 (2004). 

8.      F. Abbasi and H. Mirzadeh, “Adhesion between modified and unmodified poly(dimethylsiloxane) layers and biomedical application”, International Journal of Adhesion and Adhesives 24 (3), 247-257 (2004). 

9.      E. Hadadi, F. Abbasi, and A. Shojaei, “Wear and Thermal Effects in Low Modulus Polymer-Based Composite Friction Materials”, Journal of Applied Polymer Science, 95, 1181-1188 (2005).

10.   A. Shojaei and F. Abbasi, “Cure Kinetics of a Polymer-Based Composite Friction Material”, Journal of Applied Polymer Science 100, 9-17 (2006).

11.  F. Abbasi, H. Mirzadeh, M. Simjoo, " hydrophilic Interpenetrating polymer networks of poly(dimethyl siloxane) (PDMS) as biomaterial for Cochlear Implants "Journal of Biomaterials Science. Polymer Edition 17 (3), 341-355 (2006).

12.  Farhang Abbasi and Kiyumars Jalili "Die Hydrophilierung von Siliconelastomeren für biomedizinische", GAK Gummi Fasern Kunststoffe Magazin, 10, 654 - 665 (2008). 

 

13.                 A. Shenavar, F. Abbasi, Morphology, Thermal, and Mechanical Properties of AcrylonitrileButadieneStyrene/Carbon Black Composites, J Appl Polym Sci 105: 22362244 (2007).

 

14.    مهديه احمدي، فرهنگ عباسي، و كاظم مقدميان، " بررسي تأثير پركننده‌هاي هيبريدي آلي رس/دوده کربن روي خواص آميزه آج تاير راديال " مجله صنعت لاستيك, شماره 44, 37-42 (1386). (M. Ahmadi, F. Abbasi, and Kazem Moghadamian, “Studying the effects of carbon black/organoclay hybrid fillers on the properties of tire tread compounds”, Rubber Industry Journal, 44, 37-42 (2007).).

 

15.    امير زمانی زينلی، فرهنگ عباسی و کيومرث جليلی, بررسي فرآيندهاي توليد ترپليمر آکريلونيتريل-بوتادي­ان-استايرن (ABS). بخش اول: فرآيند تعليقي، مجله شيمی و مهندسی شيمی ايران, سال ششم، شماره 31، (1386)، صفحات 54-64. (A. Zamani, F. Abbasi and K. Jalili, A Review on the Production Processes of Acrylonitrile-Butadiene-Styrene (ABS) Terpolymer. Part I: Suspension Process, , Iran Journal of IACHE, 6 (31), 54-64 (2008) )

 

16.    امير زمانی زينلی، فرهنگ عباسی و کيومرث جليلی, بررسي فرآيندهاي توليد ترپليمر آکريلونيتريل-بوتادي­ان-استايرن (ABS). بخش دوم: فرآيند امولسيوني, مجله شيمی و مهندسی شيمی ايران, سال ششم، شماره 32، (1386)، صفحات 3-9. (A. Zamani, F. Abbasi and K. Jalili, A Review on the Production Processes of Acrylonitrile-Butadiene-Styrene (ABS) Terpolymer. Part II: Emulsion Process, Iran Journal of IACHE, 6 (32), 3-9 (2008) ).

17.   کيومرث جليلی، فرهنگ عباسی و امير زمانی زينلی، بررسي فرآيندهاي توليد ترپليمر آکريلونيتريل-بوتادي­ان-استايرن (ABS). بخش سوم: فرآيند جرمي, مجله شيمی و مهندسی شيمی ايران, سال هفتم، شماره 33، (1386)، صفحات 3-9. (K. Jalili, F. Abbasi and A. Zamani, A Review on the Production Processes of Acrylonitrile-Butadiene-Styrene (ABS) Terpolymer. Part III: Bulk Process, , Iran Journal of IACHE, 7 (33), 3-9 (2008))

18.       مهديه احمدي، فرهنگ عباسي و حسين قره­باغی، بررسي اثر سامانه پرکننده هيبريدي دوده-آلي­رس بر روي خواص آميزه­ آج تاير, مجله علوم و تکنولوژی پليمر، جلد 21، شماره 4، 339-346 (1387). (M. Ahmadi, F. Abbasi and H. Gharebaghi, “Effect of carbon black/organoclay hybrid filler system on tread compound properties, Iranian Journal of Polymer Science and Technology, 21 (4), 339-346 (2008).)

 

19.  K. Jalili, F. Abbasi, S.S. Oskoee, Z. Alinejad, Relationships between the morphology, swelling and mechanical properties of poly(dimethyl siloxane)/poly(acrylic acid) interpenetrating networks, Journal of the Mechanical Behavior of Biomedical Materials 2 (5), 534-541 (2009).

 

20.  Haji Gorgan Kalteh, Mostafa Rezaei, Farhang Abbasi, Nasrin Sheikh, Radiation-Induced Graft Copolymerization of MMA Monomer onto UHMWPE: Adhesion Improvement, J Appl Polym Sci 108: 1086–1092 (2008).

 

21.  A. Shenavar, F. Abbasi, M. K. Razavi Aghjeh, and A. Zamani, “Flow and Mechanical Properties of Carbon Black Filled Acrylonitrile-Butadiene-Styrene (ABS)”, Journal of Thermoplastic Composite Materials 22, 753-766 (2009).

 

22.  Hamid Reza Azimi, Mostafa Rezaei, Farhang Abbasi, Ali Charchi, Yahya, Bahluli, “Non-isothermal degradation kinetics of MMA-St copolymer and EPS lost foams”, Thermochimica Acta 474, 72–77 (2008).

23.       صديقه مير حسيني، فرهنگ عباسی و ناصر هراثي, اسفنج­هاي پلي­استايرن قابل انبساط با آب (WEPS), مجله شيمی و مهندسی شيمی ايران، سال هشتم، شماره 40، تير 1388، صفحات 24-36.

 

24.       سحر شيوايي و فرهنگ عباسي، پليمريزاسيون به کمک امواج فراصوت, مجله شيمی و مهندسی شيمی ايران، سال هشتم، شماره 42، 1388، صفحات 29-37.

25.  F. Abbasi and K. Jalili and " Hydrophilisation of silicone rubber for biomedical applications", RFP International, 3, 337 - 347 (2008). 

 

26.  K. Jalili, F. Abbasi, M. Nasiri, M. Ghasemi, E. Haddadi, ”Preparation and Characterization of Expandable St/MMA Copolymers Produced by Suspension Polymerization”, Journal of Cellular Plastics, 45, 197-224 (2009).

27.  A. Zamani, F. Abbasi and A. M. Aghah, “Characterization of rubber phase in acrylonitrile-butadiene-styrene polymers”, Journal of Applied Polymer Science, 114, 1908–1913 (2009).

 

28.  Hamid Reza Azimi, Mostafa Rezaei and Farhang Abbasi, Thermo-oxidative degradation of MMA–St copolymer and EPS lost foams: Kinetics study, Thermochimica Acta
488 (1-2), 43-48 (2009).

 

29.  E. Jannatduost, A.A. Babaluo, F. Abbasi, M. Akhfash Ardestani, M. Peyravi, Surface modification of nanocomposite ceramic membranes by PDMS for condensable hydrocarbons separation, Desalination 250, 1136-1139 (2010).

 

30.  F. Abbasi, K. Jalili, Z. Alinejad, M. Alizadeh, Synthesis and Characterization of PDMS/PAAc Sequential IPNs, Iranian Journal of Chemical Engineering 7(1), 3-12 (2010).

 

31. F. Abbasi, A. M. Agah, E. Mehravar, Study on the Effective Process Parameters Influencing Styrene and Acrylonitrile Grafting onto Seeded Polybutadiene Latex, J Appl Polym Sci 119: 1752–1761(2011).

 

32. K. Jalili, F. Abbasi, and M. Nasiri, Copolymerization of Styrene and Methyl Methacrylate. Part I: Experimental Kinetics and Mathematical Modeling” Polymer 52 4362-4376 (2011).

 

33. M. Alizadeh, F. Abbasi, M. Farahi and K. Jalili, Silicone-Based Hydrogels Prepared by IPN Formation: Swelling Properties and Confinements Effects on the Kinetics of IPN Formation, J Appl Polym Sci, 124 (2), 985–992 (2012).

 

34. E. Haddadi, E. Mehravar, F. Abbasi, K. Jalili, Expandable styrene/ methyl methacrylate copolymer: Synthesis and determination of VOCs by combined thermogravimetry/differential thermal analysis-gas chromatography/mass spectrometry, J Appl Polym Sci, 124, 4711–4720 (2012).

 

35. E. Mehravar, F. Abbasi, K. Jalili, M. Rezaei, S. Heydarpoor, Synthesis and Expansion Characteristics of Expandable Styrene/Methyl Methacrylate Copolymer Beads: The Effects of Monomer Composition and Cell Structure Modifying Aid, Journal of Cellular Plastics, 48(2) 161–190 (2012).

 

36. Hamid Reza Azimi, Mostafa Rezaei and Farhang Abbasi, The effect of expansion conditions on the batch foaming dynamics of St–MMA copolymer, Journal of Cellular Plastics 48(2) 125–140 (2012).

 

37. Kh. Shahbazi, M. K. Razavi Aghjeh, F. Abbasi , M. Partovi Meran, M. Mehrabi Mazidi, Rheology, morphology and tensile properties of reactive compatibilized polyethylene/polystyrene blends via Friedel–Crafts alkylation reaction, Polym. Bull. 69 (2), 241-259 (2012).

 

38. E. Jannatdoust, A. A. Babaluo, F. Abbasi, M. Akhfash Ardestani, M. Peyravi, A new technique for preparation of PDMS/ceramic nanocomposite membrane for gaseous hydrocarbons separation, J. Appl. Polym. Sci., 126(3), 1077-1087 (2012).

 

39. S. M. Khosrowshahi, F. Abbasi, N. Harasi, and B. M. Maher, Relationships between synthesis parameters and properties of water expandable polystyrene (WEPS), Journal of Cellular Plastics, 49(1), 13-31, 2012.

 

40. M. Mehrabi Mazidi, M. K. Razavi Aghjeh, F. Abbasi, Evaluation of fracture toughness of ABS polymers via the essential work of fracture (EWF) method, J Mater Sci, 47, 6375–6386 (2012).

 

41. K. Jalili, F. Abbasi, and A. Milchev, Dynamic Compression of in Situ Grown Living Polymer Brush: Simulation and Experiment, Macromolecules, 30, 9827–9840 (2012).

 

 

 

PATENTS

1.      F. Abbasi, C. Jolly, M. Farhadi, E. Hochmair, and H.Mirzadeh, “Intra-cochlear electrode with a partially detachable hydrophilic segment for deferred self-positioning”, U. S. Pat. Appl. 20080058914 (2008). 

2.      F. Abbasi and H. Mirzadeh, “A modern electrode for cochlear implant prosthesis”, Iranian Patents No. 28360 (2003).

3.    F. Abbasi, C. Jolly, M. Farhadi, E. Hochmair, and H. Mirzadeh, “Intra-cochlear electrode with a partially detachable hydrophilic segment for deferred self-positioning”, European Patent No. EP1425940 (2004).

4.    F. Abbasi, M. Pesaran Hajabbas, M. Mofidfar, “Bulk modification induced surface modification of polymers”, Iranian Patent. No. 29709 (2004) (Approved by IROST).

5.    F. Abbasi, M. Ahmadi Paydar, and K. Jalili, “Application of Polymeric Additives as Pour Point Depressant”, Iranian Patent. No.32637 (2005).

6.   فرهنگ عباسی, کيومرث جليلی، مرتضی نصيری، مصطفی قاسمی، و يحيی بهلولی، "ساخت کوپليمر مورد استفاده در ريخته­گری، شماره ثبت 36342 (1385) (دارای تاييديه از سازمان پژوهش­های علمی و صنعتی). (F. Abbasi, K. Jalili, M. Nasiri, and Y. Bahloli, “Synthesis of a copolymer for lost foam casting technology”, Iranian Patent No. 36341(2006).)

7.   فرهنگ عباسی، کيومرث جليلی، مرتضی نصيری، ناصر هراثی، و يحيی بهلولی، "ساخت پليمر فوم شونده برای استفاده در ريخته­گری"، شماره ثبت 38009 (1385) (دارای تاييديه از سازمان پژوهش­های علمی و صنعتی). (F. Abbasi, K. Jalili, M. Nasiri, N. Harasi and Y. Bahloli, “Synthesis of a lost foam polymer for lost foam casting technology”, Iranian Patent No. 38009(2006).)

8.   فرهنگ عباسی، ناصر هراثی، صديقه ميرحسينی خسروشاهی، و فهيمه درخشان­فرد "ساخت پليمر فوم شونده پلي­استايرن انبساطی با آب (WEPS)"، شماره ثبت 38035 (1385). (F. Abbasi, N. Harasi, S. Mirhoseini, and F. Drakhshanfard, “Synthesis water expandable polystyrene”, Iranian Patent No. 38035 (2006).)

9.   علي­اكبر بابالو، الهام جنت دوست ، و فرهنگ عباسی، "ساخت غشاهاي هيبريدي سراميك/PDMS با پايه­هاي سراميكي نانوساختار با روش نوين براي جداسازي هيدروكربن­هاي گازي"، شماره ثبت 53070 (1387).

10. سحر شيوايي و فرهنگ عباسی، "پليمريزاسيون به کمک امواج فراصوت" شماره ثبت 58015 (1387).

11. سحر شيوايي، فرهنگ عباسی و اميد دادگری، "توليد پليمرهاي داراي تاكتيسيتي با پليمريزاسيون به کمک امواج فراصوت" شماره ثبت 58223 (1388).

12. مرتضي نصيري و فرهنگ عباسي " پليمريزاسيون در حضور مواد جاذب و بازتابنده امواج مادون قرمز"، شماره ثبت 61434 (1388).

13.   فرهنگ عباسی، سميه جباری، مرتضی نصيری، و بهناز ماهر، "سنتز نانوکامپوزيت کوپليمر استايرن-آکريلو­نيتريل/ رس به روش پليمريزاسيون درجا" شماره ثبت 65523 (1389).

14. احسان مهرآور ، فرهنگ عباسي ، كيومرث جليلي و الياس حدادي، "اصلاح ريزساختار کوپليمر قابل انبساط استايرن- متيل متاکريلات براي بهبود خواص کوپليمر انبساطي"، شماره ثبت 64985 (1389).

 

CONFERENCE PAPERS

1.   F. Abbasi, E. Jabbari and F. Afshar Taromi, 2th Iranian Cong. Chem. Eng. Amirkabir Univ. of Technol., 24-26 Feb. 1997, 1, 584 (1997). 

2.     F. Abbasi, E. Jabbari and F. Afshar Taromi, 2th Iranian Cong. Chem. Eng. Amirkabir Univ. of Technol., 24-26 Feb. 1997, 2, 237 (1997). 

3.     F. Abbasi, F. Afshar Taromi and E. Jabbari, Proceeding of the International Seminar on Polym. Sci. and Technol., 3-5 Nov. 1997. 1, 233(1997). 

4.     F. Abbasi, A. Shojaei, G. A. Iranpoor and A. A. Katbab, Proceeding of the International Seminar on Polym. Sci. and Technol., 3-5 Nov. 1997. 2, 586(1997). 

5.   F. Abbasi, A. Shojaei, G. A. Iranpoor and A. A. Katbab, Proceeding of the 8th European Conference on Composite Material, 3-6 Jun 1998, Italy, 354 (1998). 

6.     F. Abbasi, A. Shojaei and A. A. Katbab, Thermal failure of friction pairs in the brake systems of rail vehicles, Proceedings of 4th International & 8th Annual Conference of Iranian Society of Mechanical Engineers, Tehran, Iran, Vol. 3, 107-112, May 2000. 

7.   M. Frounchi, K. Ghesmat and F. Abbasi, “Improvement of Miscibility of Phenolic Resin-NBR Blends by Resin Modification”, Proceedings 5’th National & 4’th International Chemical Engineering Congress, April 24-27, 2000, Shiraz, Iran (in Farsi) Vol. 3, pp. 40-45. 

8.     M. Frounchi, K. Ghesmat and F. Abbasi, “Property improvement of  phenolic resin-NBR IPNs by modification of phenolic resin”, Proceedings of Fifth Seminar on Polymer Science and Technology, 12-14 September 2000, Polymer Dept., Amirkabir University, Tehran, 161-165. 

9.     F. Abbasi, H.Mirzadeh, and A. A. Katbab, “Self curving of electrode array by polymer surface modification”, Proceedings of the 6th International Conference on Tactile Aids, Hearing Aids and Cochlear Implants, University of Exeter, pp 61-64, May (2000).  

10.  F. Abbasi, H. Mirzadeh, and A. A. Katbab, “Bulk and surface modification of silicone rubber for biomedical applications”, Proceedings of Polymers in the Third Millennium, Montpellier II, France, 2-6 September 2001.

11.  F. Abbasi, H. Mirzadeh, and A. A. Katbab, “Radiation-induced surface modification of silicone rubber and its application in cochlear implant systems”, Proceedings of the 8th Symposium, Cochlear Implant in Children, p. 61, Universal City Hilton and Towers CA, Feb.-Mar. (2001). 

12.  F. Abbasi, H. Mirzadeh, and A. A. Katbab, “Self- positioning segmented for close hugging of modiolus”, Proceedings of the First International Symposium on Cochlear Implant and Related Sciences, page 42, Tehran, Iran 25-27 April 2002.  

13.  F. Abbasi, H. Mirzadeh, and A. A. Katbab, “Application of laser–induced polymerization in modern electrodes for cochlear implants”, Proceeding of the First National Conference on Lasers in Medicine and Biomedical Engineering, pp 110-117, 1-2 May 2002, Tehran, Iran. 

14.  F. Abbasi and H. Mirzadeh, “Adhesion of modified to unmodified PDMS layers and its applications in modern prosthesis”, Proceedings of the 6th Iranian Seminar Polymer Science and Technology (ISPST), Iran, Tehran, 12-15 May 2003, p.167.

15.  E. Hadadi, F. Abbasi, S. M. S. Mortazavi, "Thermal and wear effects in polymer-based composite friction materials", 6th Seminar on Design and Manufacturing ,2003, Tehran, Iran.

16.  A. Shojaei and F. Abbasi, “A Numerical Approach to Analyze the Curing Process of Composite Railroad Brake Shoe”, The 4th Asian-Australasian Conference on Composite Materials Composites Technologies for 2020, 6 – 9 July 2004, Sydney, Australia.

17.  F. Abbasi, E. Haddadi, ”Properties of low modulus polymer-based composite friction materials”, 8 International and 12 Annual Mechanical Engineering Conference, May 2004, Tarbiat Modarres University, Tehran, IRAN.

18.  F. Abbasi, “Hydrophilic polymeric multi-component systems containing Poly (dimethylsiloxane)”, PPS-20, 20-24 June 2004, Akron, OH.

19.  F. Abbasi and H. Mirzadeh, “Modification of silicone rubber for application in new intra-cochlear electrodes”, MACRO 2004, 4-9 July 2004, Paris, France.

20. M. Simjoo, F. Abbasi, M. Mofidfar, and K. Jalili, “Bulk modification induced surface modification as a modification technique for silicone rubber” Proceedings of Eurpean Polymer Congress 2005, Moscow, Russia, June 27-July 1, p. 101.

21. M. Ahamdi Paydar, F. Abbasi, S. A. Tabatabaei, F. Mehraban, and K. Jalili, “Application of poly (methyl methacrylate) as a pour point depressant material”, ISPST2005, Tehran, Iran, 2005.

22. M. Simjoo, F. Abbasi, M. Mofidfar, K. Jalili, and Z. Alinejad. “Bulk modification induced surface modification as a modification technique for silicone rubber”, ISPST2005, Tehran, Iran, 2005.

23. F. Abbasi and H. Mirzadeh, "Modification of silicone rubber for biomedical application", ICBME 2005, 2005, Tabriz, Iran.

24. فرهنگ عباسي، محمد سيم‌جو، كيومرث جليلي، مهدي پسران و زينب علي‌نژاد "Bulk modification induced surface modification as a modification technique for silicone rubber", ICBME 2005, 2005, Tabriz, Iran.

25.      F. Abbasi and K. Jalili, "Hyrophilization of silicone rubber for biomedical applications", Silicone Elastomers 2006, Frankfurt, Germany, 2006.

26.          مهديه احمدي، فرهنگ عباسي، كاظم سبحان منش و كاظم مقدميان, بررسي تأثير پركننده‌هاي هيبريدي نانورس/ دوده کربن روي خواص آميزه آج تاير راديال, همايش ملی لاستيک, شيراز, ايران, 1385.

27.          محمد مفيدفر, فرهنگ عباسی و احسان ربيع‌زاده، "وابستگي ويژگي‌هاي سطحي پلي (دي متيل سيلوکسان) اصلاح شده به نوع حلال در روش اصلاح سطح به کمک اصلاح توده پليمر", کنگره مهندسی شيمی, دانشگاه تربيت مدرس , تهران, ايران, 1385.

28. خدابخش شهبازی، مير کريم رضوی و فرهنگ عباسی، سازگارسازي واکنشی آلياژهاي پلي استايرن/ پلي اتيلن از طريق واکنش فريدل کرافتس (11th Iranian Chemical Engineering Congress, 2006, Tarbiat Modarres University, Tehran, Iran.)

29. K. Shahbazi, M. K. Razavi, and F. Abbasi, Reactive Compatibilization of Polyethylene/Polystyrene (PE/PS) Blends via Friedel-Crafts Alkylation; Rheology and Morphology (Macro 2006, Punie, India).

30. A. Shenavar , F. Abbasi, and A. Zamani, Thermal and Mechanical Behaviors of ABS/CB Composites, ISPST 8th International Seminar on Polymer Science and Technology, Tehran, Iran, 2007.

31. M. Nasiri, F. Abbasi, K. Jalili, N. Harasi, and M. Ghasemi, A comparative investigation on the properties of expandable St/MMA copolymers and EPS for lost foam casting, ISPST 8th International Seminar on Polymer Science and Technology, Tehran, Iran, 2007.

32. K. Jalili, F. Abbasi, M. Nasiri, M. Ghasemi, E. Haddadi, and H. Salimi , Preparation of Expandable St/MMA Copolymers by Suspension Polymerization, ISPST 8th International Seminar on Polymer Science and Technology, Tehran, Iran, 2007.

33. H. Salimi, F. Abbasi, A. Shojaei, K. Jalili and M. Nasiri, Prediction of Particle Size and Particle Size Distribution in Suspension Polymerization of Methyl Methacrylate, ISPST 8th International Seminar on Polymer Science and Technology, Tehran, Iran, 2007.

34. K. Jalili, F. Abbasi, and Z. Alinejad, Polymerization of Acrylic Acid in the Presence of Silicone Rubber and Properties of Phase Separated IPNs, ISPST 8th International Seminar on Polymer Science and Technology, Tehran, Iran, 2007.

35. M. K. Razavi Aghjeh, Kh. Shahbazi, and F.Abbasi, Reactive Compatiblization of Polyethylene/Polystyrene (PE/PS) Blends via Friedel-Crafts Alkylation Reaction, ISPST 8th International Seminar on Polymer Science and Technology, Tehran, Iran, 2007.

36. Kiyumars jalili; Farhang Abbasi; Zienab Alinejad, “Relationships between morphology, swelling, mechanical properties of PDMS/PAAc sequential IPNs”, 5th International Chemical Engineering Congress and Exhibition, Kish Island, 2 - 5 January 2008.

37. M. Rezaei; S. Shakori; F. Abbasi; E. Esmaeilnezhad; Y. Bahlol, “Drying Kinetics and Thermal Properties of Polymer Latex Coating Used in Lost foam Casting”, 5th International Chemical Engineering Congress and Exhibition, Kish Island, 2 - 5 January 2008.

38. الهام جنت دوست، علي اكبر بابالو، فرهنگ عباسي، معصومه اخفش اردستاني، و مجيد پيروي، "اصلاح سطح غشاهاي سراميكي نانوكامپوزيتي با استفاده از پلي­دي­متيل­سيلوكسان " دوازدهمين كنفرانس مهندسي شيمي ايران، تبريز، ايران، 1387.

39. H. Azimi, M. Rezaei, F. Abbasi, and Y. Bahluli, "Isokinetic Relationships to Evaluate Thermal Degradation Kinetics Parameters of MMA-St Copolymer and EPS Lost Foams", 12th National Chemical Engineering Conference, Tabriz, Iran, 2008.

40.  صديقه ميرحسيني خسروشاهي ، فرهنگ عباسی، ناصر هراثي، " سنتز اسفنج­ پلي­استايرن قابل انبساط با آب (WEPS)"، دوازدهمين كنفرانس مهندسي شيمي ايران، تبريز، ايران، 1387.

41.  مرتضي نصيري، فرهنگ عباسی و كيومرث جليلي ، " محاسبه پارامترهاي سينتيکي کوپليمريزاسيون استايرن­- متيل متاکريلات در حضور عامل انبساطي "، دوازدهمين كنفرانس مهندسي شيمي ايران، تبريز، ايران، 1387.

42.  مرتضي نصيري، فرهنگ عباسی و كيومرث جليلي، " بررسي رفتار حرارتي راكتور کوپليمريزاسيون تعليقي استايرن­- متيل متاکريلات براي تهيه کوپليمر انبساطي " ، دوازدهمين كنفرانس مهندسي شيمي ايران، تبريز، ايران، 1387.

43.  صادق پيامي گلهين، فرهنگ عباسي، علي اکبر بابالو، تهيه و بررسي خواص IPN هاي سيليکون رابر و پلي(متيل متاکريلات) پرشده با زئوليت، دوازدهمين كنفرانس مهندسي شيمي ايران، تبريز، ايران، 1387.

44. K. Jalili, F. Abbasi, M. Nasiri, "Suspension Copolymerization of Styrene and Methyl Methacrylate: Experimental Kinetics and Mathematical Modeling", 12th National Chemical Engineering Conference, Tabriz, Iran, 2008.

45. K. Jalili, F. Abbasi, M. Nasiri", Suspension Copolymerization of Styrene and Methyl Methacrylate: Experimental Kinetics and Mathematical Modeling", 12th National Chemical Engineering Conference, Tabriz, Iran, 2008.

46.  E. Jannatduost, A.A. Babaluo, F. Abbasi, M. Akhfash Ardestani, M. Peyravi, “Polydimethylsiloxane/Ceramic Nanocomposite Hybrid Membrane for Condensable Hydrocarbons Separation”, 2nd International Congress of Nanoscience and Nanotechnology, Tabriz, Iran, 2008.

47. A. shenavar, F. Abbasi, H. Ranjbar, F. Seyyed Najafi, Morphological Study of Acrylonitrile–Butadiene–Styrene/Carbon Black Composites and its effect on Mode of Fracture, 2nd International Congress of Nanoscience and Nanotechnology, Tabriz, Iran, 2008.

48. Kiyumars Jalili, Farhang Abbasi, Morteza Nasiri, Copolymerization of Styrene and Methyl Methacrylate: Experimental Kinetics and Mathematical Modeling, ISPST 9th International Seminar on Polymer Science and Technology, Tehran, Iran, 2009.

49. Kiyumars Jalili, Farhang Abbasi, Morteza Nasiri, Prediction of Bivariate Molecular Property and Property Distributions in Free Radical Copolymerization, ISPST 9th International Seminar on Polymer Science and Technology, Tehran, Iran, 2009.

50. Ehsan Mehravar, Kiyumars Jalili and Farhang Abbasi, Expansion Characteristics of Lost Foam Copolymer Beads. 1. Determination of VOCs by a Combined TG/DTA-GC/MS Technique, ISPST 9th International Seminar on Polymer Science and Technology, Tehran, Iran, 2009.

51. S. Payami, Z. Kanani, F. Abbasi, and A. A. Babaluo, Evaluation of PDMS/PMMA IPN Mixed Matrix Membranes for Separation of Linear and Non-linear Hydrocarbones, ISPST 9th International Seminar on Polymer Science and Technology, Tehran, Iran, 2009.

52. F. Abbasi, K. Jalili, M. Alizadeh, Silicone-Based Hydrogels Prepared by IPN Formation: The Swelling Properties and Confinements Effects on the Kinetics of IPN Formation, Malaysia, 2009.

53. M. Alizadeh, F. Abbasi and K. Jalili, Swelling Properties and Confinements Effects on the Kinetics of Silicone-Based IPNs Formation, PNG 2010, Goslar, Germany, 2010.

54.  F. Abbasi, S. G. Ghoreishi and K. Jalili, Surface Modification of PDMS through Networking of Surface Proximal Layers, PNG 2010, Goslar, Germany, 2010.

55. E. Mehravar, F. Abbasi, K. Jalili, M. Rezaei, “Expansion Characteristics of Expandable Styrene/Methyl Methacrylate Copolymer Beads: The Effects of Molecular Weight and Particle Size Distribution”, Polymer Processing Society (PPS), Asia/Australia Regional Meeting, 15-17 November 2011, Kish Island, Iran.

56.  E. Mehravar, F. Abbasi, K. Jalili, M. Rezaei, S. Heidarpoor, “Expansion Characteristics of Expandable Styrene/Methyl Methacrylate Copolymer Beads: The Effects of Monomer Composition and Cell Structure Modifying Aid”, Polymer Processing Society (PPS), Asia/Australia Regional Meeting, 15-17 November 2011, Kish Island, Iran.

57.  Mina Alizadeh, Farhang Abbasi, Hakimeh Ghaleh, Parameters Influencing Degradation of the Gelatin/Chitosan Scaffolds, ISPST 2012, Amirkabir University of Technology, Tehran, Iran, 2012.

58.  Mina Alizadeh, Farhang Abbasi, Hakimeh Ghaleh, Aldehyde and Carbodiimide Crosslinked Gelatin/Chitosan Scaffolds, ISPST 2012, Amirkabir University of Technology, Tehran, Iran, 2012.

59.  Hakimeh Ghaleh, Farhang Abbasi, Mina Alizadeh, Modification of freeze-drying process as a method of the scaffold fabrication for use in the skin tissure engineering, ISPST 2012, Amirkabir University of Technology, Tehran, Iran, 2012.

60.  Kiyumars Jalili, Farhang Abbasi, Andrey Milchev, Dynamic investigation of in situ Grown Living Polymer Brush: A Monte Carlo Simulation, ISPST 2012, Amirkabir University of Technology, Tehran, Iran, 2012.

 

Supervised thesis

1- حکيمه قلعه، ساخت پيوندهاي پوستي چندلايه با زيرلايه­ زيست­ تخريب ­پذير پروتئینی و پوشش سيليکوني براي مهندسی بافت پوست، پايان ­نامه کارشناسی ارشد، دانشگاه صنعتی سهند، 1391.

2- مينا عليزاده اقدم، ساخت داربست­ هاي متشکل از ژلاتين و پلي­ ساکاريد براي ترميم سوختگي و زخم­ هاي پوستي و مطالعه­ تخريب و ساختار متخلخل آن­ ها، پايان ­نامه کارشناسی ارشد، دانشگاه صنعتی سهند، 1389

 

Courses Taught

 

1.             Advanced Fluid Mechanics

2.             Physical and Mechanical Properties of Plastics

3.             Principles of Polymerization Engineering

4.             Kinetics and Polymerization Reactors Design

5.             Polymer Blends

6.             Kinetics and Reactors of Polymerization

7.             Biomaterials

 

Copyright 2011 by ipm web master    All Rights reserved    E-Mail: m.mashkour1990@gmail.com
                                                                                                            z_aghaeifar@sut.ac.ir